Hoover VHD8122 8kg drum pulley.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hoover VHD8122 8kg drum pulley.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 1, 2008 at 9:22 am #41464
    aqualectric
    Participant

    Hoover VHD8122 Vision 8kg washer.

    I need the part number for the drum pulley please. It’s a plastic pulley with a splined centre boss. Also the part number for the belt as well please; it’s a 1225 J6. Nothing on Connections……:rolls:

    Thanks!!

    Steve.

    December 1, 2008 at 3:40 pm #270254
    iadom
    Moderator

    Re: Hoover VHD8122 8kg drum pulley.

    Pulley…41021329
    Belt……41021973.

    December 1, 2008 at 8:09 pm #270255
    lerch
    Participant

    Re: Hoover VHD8122 8kg drum pulley.

    Has the pulley just worn ?? if so I have used a large washer to pull pulley tight to the drum and problem was solved.

    December 1, 2008 at 10:30 pm #270256
    aqualectric
    Participant

    Re: Hoover VHD8122 8kg drum pulley.

    Thanks for the part numbers, Jim. 😀
    I have used a washer to pull the drum shaft through the pulley; but the boss is loose in the pulley. Not much, but enough to undo the bolt every 5 or so washes.

    Thanks again guys!!

    Steve.

    December 1, 2008 at 10:56 pm #270257
    iadom
    Moderator

    Re: Hoover VHD8122 8kg drum pulley.

    Nothing new there then, the old Hoover logic pulleys were about the worst of any for constantly coming loose. 😥

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.