Wiring Harness WMA35

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Wiring Harness WMA35

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 1, 2008 at 7:02 pm #41484
    mike412
    Participant

    Hi folks.

    I need a motor/door wiring harness for the above model.

    I have 1603396 which has a red coded motor plug, but the original plug is black with different keyways. Is there a part number for the black coded plug/loom?

    Many thanks,

    Mike

    December 1, 2008 at 7:14 pm #270335
    iadom
    Moderator

    Re: Wiring Harness WMA35

    Thats he only one I know of and the only one shown on Partfinder. Plugs are normally white at both ends???

    Jim.

    December 1, 2008 at 8:29 pm #270336
    mike412
    Participant

    Re: Wiring Harness WMA35

    Thanks Jim,

    Yes the plugs are white, but one has a streak of red “paint”, the other black, as I said the keyways are different. Obviously for a reason. To make this loom fit I would have to start cutting away plastic keys. Wouldnt have thought I would have to do that.

    Thanks for checking,

    Regards Mike

    December 1, 2008 at 11:02 pm #270337
    iadom
    Moderator

    Re: Wiring Harness WMA35

    Double checked with the very latest info I have and it still only gives that one part number. 😕

    Jim.

    December 2, 2008 at 3:54 pm #270338
    iadom
    Moderator

    Re: Wiring Harness WMA35

    Did a WMA today and had a quick look at the wiring harness. Just a thought, you are trying to put the motor plug in the right way round, thats to say with the wiring coming out upwards, facing towards the outer drum and not down towards the floor?

    Jim.

    December 5, 2008 at 10:58 am #270339
    iadom
    Moderator

    Re: Wiring Harness WMA35

    Did you manage to sort this one out Mike?

    Jim.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.