whirlpool w/m model HDW6000/WH

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool w/m model HDW6000/WH

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 4, 2008 at 6:08 pm #41592
    richardable
    Participant

    customer reports that the machine wont start. took an interlock just in case. fitted it but not the cure( as expected) this model looks an expensive buy. neons display program selected and the door light shows door locked. i have costed a new board at approx £170.00 is it likely to be this board?
    thanks
    richard

    December 5, 2008 at 8:11 am #270692
    aqualectric
    Participant

    Re: whirlpool w/m model HDW6000/WH

    Have you checked the motor brushes? 😉

    HTH,

    Steve.

    December 5, 2008 at 9:07 am #270693
    richardable
    Participant

    Re: whirlpool w/m model HDW6000/WH

    steve, thanks for tip, customer says machine less than 18mths old, but used every day…are the brushes likely to wear down so soon?
    richard

    December 5, 2008 at 9:46 am #270694
    aqualectric
    Participant

    Re: whirlpool w/m model HDW6000/WH

    It’s a modern machine, mate….anything is possible…. :rolls:

    Steve.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.