- This topic has 2 replies, 2 voices, and was last updated 17 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Rinse light flashes when motor action required and no turn.
Had motor out and brushes only half worn.
Any cheap ideas or is it likely to be module.
Thanks
MikeRe: Miele W842 Washer
Check cable connections to motor & board, board fault can also give this (F4) which means no signal received from tacho. There is a thermal cut-out in motor windings which can go open circuit also worth a check.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.