- This topic has 3 replies, 3 voices, and was last updated 17 years, 4 months ago by
.
-
Posts
-
when I put the machine on it does not turn clockwise and anti clockwise to wash but it spins fine. the washing machine also works fine if I try it empty. can anyone tell me what the problem is please?
Re: diplomat apm8702 not washing properly
most problems are down to the module in the rear rh bottom corner. outside chance its the timer.
Re: diplomat apm8702 not washing properly
But how comes it works fine if I run the machine with out any clothes in it. Could this still be the problem?
Re: diplomat apm8702 not washing properly
loose belt?
motor-brushes badly worn….won’t pass current required to turn loaded motor?
poor contacts on board-connector,= high resistance-effectively the same as above.
We are assuming here , that your description means
” the machine agitates normally when unladen-that is, it revolves, stops ,reverses,…repeat till it pumps out and spins. when i load it, it won’t agitate but will spin”my guesses …brushes ….or an outside chance that motor windings/board connections are faulty.
- You must be logged in to reply to this topic.