Leisure Zenith 100 – Think I need a new fuse?

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Leisure Zenith 100 – Think I need a new fuse?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 16, 2008 at 12:26 pm #41905
    mshelsbels
    Participant

    Hi there,

    I’m a newbie to this site, so be gentle! I have a Leisure Zenith 100 Ceramic / Electric oven. The main fan oven has stopped working, as has the clock, but the hob and smaller oven are still ok. I’m thinking I need a new thermal fuse?

    Wondered a), how do I get into the thing to replace it?
    and b), where do I buy fuse from?

    Thanks in advance!

    Hels 😕

    December 16, 2008 at 1:05 pm #271702
    kwatt
    Keymaster

    It could be the clock that’s faulty, which is more likely but I’d need a full model number to check for you. I don’t think those cookers have a thermal fuse that’d do that.

    K.

    December 19, 2008 at 12:45 pm #271703
    mshelsbels
    Participant

    Re: Leisure Zenith 100 – Think I need a new fuse?

    Hiya…thanks for the reply!
    The model number is ZE10 CRA

    Many thanks,

    Hels

    December 19, 2008 at 1:14 pm #271704
    bazza500
    Participant

    Re: Leisure Zenith 100 – Think I need a new fuse?

    There is a Thermal fuse at the back RHS(looking from the back) about a foot from the floor screwed to the side support bar. Partno. 160100590.

    This will kill the clock and fan oven.


    There is also one on the middle support bar for the conventional oven.

    December 19, 2008 at 1:19 pm #271705
    bazza500
    Participant

    Re: Leisure Zenith 100 – Think I need a new fuse?

    Oops! Meant to say power off if you`re going in. :zap:

    March 30, 2009 at 3:39 pm #271706
    Bemused
    Participant

    Re: Leisure Zenith 100 – Think I need a new fuse?

    bazza500 wrote:There is a Thermal fuse at the back RHS(looking from the back) about a foot from the floor screwed to the side support bar. Partno. 160100590.

    This will kill the clock and fan oven.


    There is also one on the middle support bar for the conventional oven.

    Am I right in thinking that the fuses are the copper U shaped things in the connection panel, if so mine appear fine but I still dont have any power to the clock and the fan oven but all else is working OK. If its not these things then I am stumped as to what you mean as I can see anything else remotely resembling a fuse.

    Hope you can help, missing the fan oven 😉

    March 30, 2009 at 4:02 pm #271707
    Bemused
    Participant

    Re: Leisure Zenith 100 – Think I need a new fuse?

    Bemused wrote:

    bazza500 wrote:
    There is a Thermal fuse at the back RHS(looking from the back) about a foot from the floor screwed to the side support bar. Partno. 160100590.

    This will kill the clock and fan oven.


    There is also one on the middle support bar for the conventional oven.

    Am I right in thinking that the fuses are the copper U shaped things in the connection panel, if so mine appear fine but I still dont have any power to the clock and the fan oven but all else is working OK. If its not these things then I am stumped as to what you mean as I can see anything else remotely resembling a fuse.

    Hope you can help, missing the fan oven 😉

    Having now seen a picture of one of these thermal fuses I recognise them at the back og each of the ovens, this site sells the Beko ones part number 160100534 can I reasonably assume that they are a suitable replacement for the one recomended above?

    March 30, 2009 at 4:10 pm #271708
    kwatt
    Keymaster

    Re: Leisure Zenith 100 – Think I need a new fuse?

    Hi,

    I don’t know if that one will do as there’s no temperature on it. 😕

    The correct one is HERE

    It’s not a stock item so would take a few days.

    HTH

    K.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.