ISE 10 Washer

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ISE 10 Washer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 1, 2009 at 9:00 pm #42204
    mike100
    Participant

    Called back to this machine after 3 weeks installed.
    Customer could not close door even though all ok up to this point.
    Went back and could not see why it would not close.
    Took out the interlock which is not easy to access and tried with door off.
    It worked alright, so I sprayed it with WD and assembled and it seemed to be ok.
    Has this happened with anyone else and is this leading to more interlock problems similar to ISE 2 and ISE 5 washers?

    Mike

    January 2, 2009 at 9:08 am #272731
    Del
    Moderator

    Re: ISE 10 Washer

    Hi Mike,

    Yours is about the 4 th or 5th door lock problem since we started selling them, so in all fairness given the volume we sell it is not exactly a problem.

    Thing is with the ISE 10 because the door is attached to the tub assy rather than the outer casing you have to be a little firmer when closing the port hole door as it tends to move backwards slightly on the dampers when closing it.

    HTH

    ALL THE BEST FOR THE NEW YEAR BTW !

    Sean

    January 2, 2009 at 6:12 pm #272732
    mike100
    Participant

    Re: ISE 10 Washer

    Thanks Sean,
    Take your point.
    HNY.
    Mike

    January 15, 2009 at 11:42 pm #272733
    candyking
    Participant

    Re: ISE 10 Washer

    Helpfull tip

    A wee bit vaseline in the lock aperture works wonders for both opening and closing the door

    John

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.