Problems with indesit w101

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Problems with indesit w101

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 10, 2009 at 10:18 pm #42472
    AASWALES
    Participant

    Hello, bit of a strange problem with this one (for me anyhow) the machine sometimes stops somewhere in the rinses and if the gentleman turns the machine off and then back on it continues correctly till the end. there’s no flashing error code at anytime and i’ve done separate tests on the pump, inlet valves and pressure switch with no faults found. Any ideas?

    January 10, 2009 at 10:21 pm #273618
    Penguin45
    Participant

    Re: Problems with indesit w101

    Motor stopping doesn’t necessarilly generate a code. Checked brushes?

    Chris.

    January 10, 2009 at 10:24 pm #273619
    AASWALES
    Participant

    Re: Problems with indesit w101

    Sorry Penguin45 what i meant was the machine stops completely, it’s like it been turned off. and no i haven’t check the brushes as the machine spin fine with washing in it.

    January 10, 2009 at 10:35 pm #273620
    helo_75
    Participant

    id be checking the plug/socket first

    January 11, 2009 at 11:30 am #273621
    AASWALES
    Participant

    Re: Problems with indesit w101

    I did check for that Helo_75 and to see if maybe the door switch was a bit temperamental but all is ok, i have ordered the UKW fault code book in hopes that there’s a something in there that could help.

    January 12, 2009 at 10:38 pm #273622
    leavemetogetonwithit
    Participant

    Re: Problems with indesit w101

    Quoted from
    http://www.emwelec.co.uk/index.php?acti … revstart=0
    “Common Faults:…
    2.Programme Stuck
    3.Machine dead.”
    Mike.

    January 12, 2009 at 11:13 pm #273623
    AASWALES
    Participant

    Re: Problems with indesit w101

    Thanks Mike, i thought it would be the board as everything else tested ok , i was just hoping that there was a slim chance that it could’ve been fixed via a reset method or something as the customer has had a real shitty two weeks, he lost his wife then was in a car crash, his combi boiler broke down and know this. Thanks to all, it’s appreciated.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.