Electrolux W3180H, 22E error showing.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux W3180H, 22E error showing.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 20, 2009 at 5:12 am #42730
    FSE-style
    Participant

    Hey pals,

    Have an Electrolux W3180H S:N 00725/0002640 washing machine that shows error 22E every 2 or 3rd time its used and wont start.

    Have been informed that

    22E The level system indicates such a wrong value at program start that the
    automatic level calibration cannot correct the fault.

    have replaced program unit card and checked pressure hose. but still comes up with the 22e every couple of times its on. When its works, it works perfect.

    anyone know of any other triggers for this error?

    thanks

    January 20, 2009 at 9:33 pm #274700
    leavemetogetonwithit
    Participant

    Re: Electrolux W3180H, 22E error showing.

    FSE-style wrote: The level system indicates such a wrong value at program start

    😕 😕 Hmm, just wondering, Could it be that too much water is remaining in the machine from previous wash on those occasions when it refuses to start? (Intermittent blockage / dodgy pump?)
    Mike.

    January 21, 2009 at 8:36 pm #274701
    spanner51
    Participant

    Re: Electrolux W3180H, 22E error showing.

    Every time I’ve seen this I take the pressure chamber off and give it a good clean. It usually cures the problem. If you get a blocked drain valve or waste pipe it usually gives error code E10

    Graham

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.