Smeg PL426X integrated D/W motor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Smeg PL426X integrated D/W motor

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 20, 2009 at 5:50 pm #42757
    iadom
    Moderator

    Machine fill then makes a gurgling, rumbling noise and water is trickling out of lower spray arm.

    Is the motor/circulation pump a complete unit on these.

    If so any idea of part number and more important, cost?

    jim.

    January 20, 2009 at 8:21 pm #274819
    Penguin45
    Participant

    Re: Smeg PL426X integrated D/W motor

    Impellor sheared is a good bet. Individual bits available, so have sent you a file.

    Chris.

    January 20, 2009 at 10:25 pm #274820
    iadom
    Moderator

    Re: Smeg PL426X integrated D/W motor

    Thanks Chris, will have a look and try and guess what might be required, unless you know already. 😉

    Jim.

    January 21, 2009 at 11:42 am #274821
    eastlmark
    Moderator

    Re: Smeg PL426X integrated D/W motor

    usually a rusted thread on rotor, complete pump is the only repair if so. Right old knacker that one, give it up is the best suggestion.

    January 21, 2009 at 3:47 pm #274822
    iadom
    Moderator

    Re: Smeg PL426X integrated D/W motor

    Thanks for that Mark, I did tell them this when they rang before Christmas but he insisted that I go out and have a look at it.

    Any idea of a ball park figure for the cost of motor so that I can put the frighteners on him. 😉

    Jim.

    January 21, 2009 at 7:23 pm #274823
    Penguin45
    Participant

    Re: Smeg PL426X integrated D/W motor

    695210261 – motor complete – £82 from M/pt.

    Chris.

    January 22, 2009 at 11:11 am #274824
    iadom
    Moderator

    Re: Smeg PL426X integrated D/W motor

    The bumf you sen me shows two different motors, one of which is over £100 from Masterpart, are these motors interchangable?

    Also this chap reckons the dishwasher is only 5 or 6 years old, surely he is mistaken?

    Jim.

    January 22, 2009 at 6:58 pm #274825
    Penguin45
    Participant

    Re: Smeg PL426X integrated D/W motor

    iadom wrote:The bumf you sen me shows two different motors, one of which is over £100 from Masterpart, are these motors interchangable?

    Yes – which is why I pointed out the cheaper one. And they say we’re tight this side of the Pennines………..

    iadom wrote:Also this chap reckons the dishwasher is only 5 or 6 years old, surely he is mistaken?

    Got to be at least 10………

    Chris.

    January 22, 2009 at 7:17 pm #274826
    iadom
    Moderator

    Re: Smeg PL426X integrated D/W motor

    Penguin45 wrote:
    Yes – which is why I pointed out the cheaper one. And they say we’re tight this side of the Pennines………..


    He lives in Diggle, Saddleworth, the residents of Saddleworth are constantly bleating about the fact that they are in Yorkshire, even though they have an Oldham postcode. 😛


    Jim.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.