Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Smeg PL426X integrated D/W motor
- This topic has 8 replies, 3 voices, and was last updated 17 years, 2 months ago by
iadom.
-
AuthorPosts
-
January 20, 2009 at 5:50 pm #42757
iadom
ModeratorMachine fill then makes a gurgling, rumbling noise and water is trickling out of lower spray arm.
Is the motor/circulation pump a complete unit on these.
If so any idea of part number and more important, cost?
jim.
January 20, 2009 at 8:21 pm #274819Penguin45
ParticipantRe: Smeg PL426X integrated D/W motor
Impellor sheared is a good bet. Individual bits available, so have sent you a file.
Chris.
January 20, 2009 at 10:25 pm #274820iadom
ModeratorRe: Smeg PL426X integrated D/W motor
Thanks Chris, will have a look and try and guess what might be required, unless you know already. 😉
Jim.
January 21, 2009 at 11:42 am #274821eastlmark
ModeratorRe: Smeg PL426X integrated D/W motor
usually a rusted thread on rotor, complete pump is the only repair if so. Right old knacker that one, give it up is the best suggestion.
January 21, 2009 at 3:47 pm #274822iadom
ModeratorRe: Smeg PL426X integrated D/W motor
Thanks for that Mark, I did tell them this when they rang before Christmas but he insisted that I go out and have a look at it.
Any idea of a ball park figure for the cost of motor so that I can put the frighteners on him. 😉
Jim.
January 21, 2009 at 7:23 pm #274823Penguin45
ParticipantRe: Smeg PL426X integrated D/W motor
695210261 – motor complete – £82 from M/pt.
Chris.
January 22, 2009 at 11:11 am #274824iadom
ModeratorRe: Smeg PL426X integrated D/W motor
The bumf you sen me shows two different motors, one of which is over £100 from Masterpart, are these motors interchangable?
Also this chap reckons the dishwasher is only 5 or 6 years old, surely he is mistaken?
Jim.
January 22, 2009 at 6:58 pm #274825Penguin45
ParticipantRe: Smeg PL426X integrated D/W motor
iadom wrote:The bumf you sen me shows two different motors, one of which is over £100 from Masterpart, are these motors interchangable?
Yes – which is why I pointed out the cheaper one. And they say we’re tight this side of the Pennines………..
iadom wrote:Also this chap reckons the dishwasher is only 5 or 6 years old, surely he is mistaken?
Got to be at least 10………
Chris.
January 22, 2009 at 7:17 pm #274826iadom
ModeratorRe: Smeg PL426X integrated D/W motor
Penguin45 wrote:
Yes – which is why I pointed out the cheaper one. And they say we’re tight this side of the Pennines………..
He lives in Diggle, Saddleworth, the residents of Saddleworth are constantly bleating about the fact that they are in Yorkshire, even though they have an Oldham postcode. 😛
Jim. -
AuthorPosts
- You must be logged in to reply to this topic.
