Hotpoint WMA46P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMA46P

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 21, 2009 at 10:27 pm #42796
    Penguin45
    Participant

    Does the “distribute in wash” thing as part of the programme and throws water out of the drawer. Occasionally a dribble, sometimes quite a lot. Machine is level, leaning back slightly, if anything.

    Any particular quirk I need to know about? Soap hose? Drawer/box?

    Chris.

    January 21, 2009 at 10:51 pm #274951
    iadom
    Moderator

    Re: Hotpoint WMA46P

    Not something I have seen except when machine has overfilled or been oversoaped. 😕

    Jim.

    January 22, 2009 at 8:06 am #274952
    geoffmackay
    Participant

    Re: Hotpoint WMA46P

    Sump blocked maybe?

    Geoff

    January 22, 2009 at 10:48 am #274953
    iadom
    Moderator

    Re: Hotpoint WMA46P

    geoffmackay wrote:Sump blocked maybe?

    Something I would expect our feathered friend has already checked. 😉 😀

    January 22, 2009 at 3:38 pm #274954
    Martin
    Participant

    Re: Hotpoint WMA46P

    Hotpoint refer to it as a ‘surge wash speed’ and it speeds up from the normal 54rpm up to 90rpm for approx 3 minutes during cotton wash cycles only. 😉

    Leaking from the dispenser is usually a sign that either the soap hose is clogged or (and more likely) the air chamber/sump hose is gunged up allowing the machine to overfill slightly.

    Users of loose detergent in the soap drawer are the main offenders I find. 8)

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.