Whirlpool ADG 7550

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADG 7550

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 24, 2009 at 4:50 pm #42870
    dawahar
    Participant

    Looking for some advice please
    Our dishwasher only pumps water from the bottom sprayer.
    I have checked all the sprayers and pipes and all are clear.
    Could the pump be on the road out ?
    any help appreciated.

    January 24, 2009 at 5:17 pm #275214
    kwatt
    Keymaster

    Re: Whirlpool ADG 7550

    Motor capacitor possibly or the motor itself are the likely suspects.

    HTH

    K.

    January 24, 2009 at 5:26 pm #275215
    johnmac11
    Participant

    Re: Whirlpool ADG 7550

    check out this post HERE it is probably the same fault as you have.

    If the fault is the same the part can be bought from the shop HERE


    John

    January 25, 2009 at 9:52 pm #275216
    dawahar
    Participant

    Re: Whirlpool ADG 7550

    Thanks for the quick replies,
    John,
    I Have already had the problem with the pipes jumping out, couple of small cable ties sorted that one out !
    kwatt,
    Do you think that the motor is running too slow ?
    When I open door quickly and look in I just catch the jets tailing off from the bottom sprayer. If I remove the bottom sprayer I can just see about 2″ high jet of water.
    I would have thought the blast of water would go higher ?
    This is why I thought the pump was on the way out, but if it is not running fast enough – same problem .
    Is there any way of checking the motor speed ?

    January 25, 2009 at 10:07 pm #275217
    Penguin45
    Participant

    Re: Whirlpool ADG 7550

    Article about your dishwasher motor HERE.

    Penguin45.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.