- This topic has 6 replies, 5 voices, and was last updated 17 years, 2 months ago by
.
-
Posts
-
Hi all got a Neff Integrated dishwasher Model S5444X1GB/16 Noisy Wash Pump/Motor still working just about. What parts would I get away with to fix ie just the Wash Pump and Sealing kit. Nightmare to get out built in solid so Cust having to get kitchen fitter in to get surround removed wont budge. So wanting to go Back armed Hopefully with Correct Parts. Was going to order from Neff parts 419027 sealing kit and part 481563 pump housing any suggestions thanks
Re: Re Noisy Wash Pump/Motor Neff Integrated
If its the motor bearing shot then you will need more than just the sealing kit. TBH you wont know the full extent until it is removed. Unlikely to be just the seal.
Re: Re Noisy Wash Pump/Motor Neff Integrated
The noise will be a rusty 608ZZ bearing so go armed with that too and an extractor and can of WD40. Together with a new Impellor kit and you’re all set to give it a go! 😀
I have found most of the time if its got to the stage that the bearings have gone then an entire motor will be required as the motor housing wil be corroded through.
Fingers crossed if your doing a large job like this with just the bearings, seal and housing then!.
Re: Re Noisy Wash Pump/Motor Neff Integrated
Yeah Cheers for that, Thinking Complete Motor. Anyone know part number for complete Motor/Pump Housing
Re: Re Noisy Wash Pump/Motor Neff Integrated
ashfordkent wrote:Yeah Cheers for that, Thinking Complete Motor. Anyone know part number for complete Motor/Pump Housing
Make a note of this link : –
https://www.bosch-eshop.com/eshop(bD1lbiZjPTAwOQ==)/bosch/gb/indexs.htm
- You must be logged in to reply to this topic.