Bosch F21 Error

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch F21 Error

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 9, 2009 at 7:24 pm #43308
    subs
    Participant

    WAE24363GB/02
    FD8708

    This machine is showing this error code which is motor fault. The brushes were worn so replaced them but cant clear the error code. Is there a procedure for resetting it?

    Thanks

    Subs

    February 9, 2009 at 9:12 pm #276801
    nomadPaul
    Participant

    You will need to enter the test mode to clear it. Its also still under manafacturers warranty by the looks of it. We normally replace the control module with this particular fault with an under-guarantee machine.

    February 9, 2009 at 10:03 pm #276802
    subs
    Participant

    The machine is in a guest house so the warranty would be void due to commercial use(the customer pointed this out to me when i mentioned the warranty). This is also why the brushes were completely worn out after just 18 months. How do i enter the test mode? Will the module be knackered too possibly?

    Thanks

    Subs

    February 10, 2009 at 1:11 pm #276803
    subs
    Participant

    Re: Bosch F21 Error

    Test mode anyone?
    PLEASE!

    I have owner of busy guest house chasing me for answers!

    Thanks

    Subs

    February 10, 2009 at 2:08 pm #276804
    Martin
    Participant

    Re: Bosch F21 Error

    Sorry cant help on that but suggest you ring Bosch tech dept and they could fax you a copy. 😀

    February 10, 2009 at 2:27 pm #276805
    MrTwintub
    Participant

    Re: Bosch F21 Error

    Hi
    To enter the test mode on that machine follow instructions bellow

    – Close the door
    – Set program selector switch to position 0 (“OFF”)
    – Wait two seconds
    – Set program selector switch to position 8
    – Wait until the start LED is flashing. (will take about two seconds)

    – Wait two seconds
    – press and hold Reduce spin speed button
    – Set program selector switch to position 9
    – Release the “Spin speed” button.

    The machine should then be ready to be tested.

    HTH

    February 10, 2009 at 2:49 pm #276806
    subs
    Participant

    Re: Bosch F21 Error

    Thanks Mr Twintub!

    Much appreciated!

    Subs

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.