Siemens WTXL1440GB/01 Element change

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WTXL1440GB/01 Element change

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 11, 2009 at 6:42 pm #43400
    Twoten
    Participant

    I have to change an element on the above Tumble Dryer.

    At first glance I looks as if the front will have to come off and the drum out.

    Can anyone tell me the best way to go about this one?

    Thanks.

    February 11, 2009 at 7:00 pm #277144
    timdowning
    Participant

    Re: Siemens WXL1440GB/01 Element change

    I had a squealing one of these today.

    I’m sure you can do it by taking the rear panel off.

    I only had to take the underneath inspection panel off to get to the pulleys.

    Cant be of anymore use than that!

    February 12, 2009 at 8:35 am #277145
    Martin
    Participant

    Re: Siemens WXL1440GB/01 Element change

    WXL1440 comes up as a washing machine. 😕

    February 12, 2009 at 8:54 am #277146
    Twoten
    Participant

    Re: Siemens WTXL1440GB/01 Element change

    Thanks Martin , I missed the ‘T’, it should read

    WTXL1400GB/01

    February 12, 2009 at 12:13 pm #277147
    Martin
    Participant

    Re: Siemens WTXL1440GB/01 Element change

    Twoten wrote:Can anyone tell me the best way to go about this one?

    Remove back panel, then several screws surrounding heater box to split the box open and withdraw heater. Gorenje made machine and cheap elements can be purchased from Masterpart (Product code: GJ34100 – about £6’ish?)

    February 12, 2009 at 2:03 pm #277148
    Twoten
    Participant

    Re: Siemens WTXL1440GB/01 Element change

    Thanks Martin,

    Easier than I thought, I will call Masterpart.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.