zanussi timer fault?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi timer fault?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 24, 2009 at 5:35 pm #43716
    abbots
    Participant

    hi,

    FLS1397W

    customer says that machine fills with water and the drum does a few revolutions ,then the timer know starts clicking round and doesn’t stop.
    any ideas, maybe programmer faulty?
    cheers.
    john

    February 27, 2009 at 5:42 pm #278278
    abbots
    Participant

    Re: zanussi timer fault?

    any one got a wiring diagram for this machine?
    i really dont want to order a timer for it if it isn’t the fault.
    cheers.
    john

    February 27, 2009 at 6:38 pm #278279
    roly16
    Participant

    Re: zanussi timer fault?

    Have you checked the usual things like insulation resistance, heater continuity, pumping out ok , inlet valves, motor brushes?

    February 27, 2009 at 6:54 pm #278280
    abbots
    Participant

    Re: zanussi timer fault?

    check brushes,element etc, nothing obvious.
    john

    February 27, 2009 at 7:25 pm #278281
    suedehead1
    Participant

    Re: zanussi timer fault?

    have you checked the taco coil and magnet.

    February 27, 2009 at 7:29 pm #278282
    SL
    Participant

    Re: zanussi timer fault?

    Replace the timer, this unit is driven by the motor pcb and the wiper contacts on the front of the timer wear, so the coding gets corrupted.

    The timer is looking for what “Service Force” call point zero which is a reference point on the cam pack.

    February 27, 2009 at 9:45 pm #278283
    abbots
    Participant

    Re: zanussi timer fault?

    cheers guys.
    john

    March 1, 2009 at 10:34 pm #278284
    martinatmull
    Participant

    Re: zanussi timer fault?

    As a service force engineer, i have been to two of these faults in recent months and it has been the tacho coil O/C. On one occasion it had fell off the motor, just put it back and away it went.

    M :o)

    March 1, 2009 at 10:52 pm #278285
    abbots
    Participant

    Re: zanussi timer fault?

    cheers for that
    john

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.