Zanussi TLE 1116w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi TLE 1116w

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 3, 2009 at 4:40 pm #43921
    PGS
    Participant

    Hi called to above toploader today, fault was when prog selected it would tumle for a few secs then prog and option buttons would extinguish and end neon flashes. Indicating drum senser. In diagnostics I get 6 flashes and 10 flashes which I think equates to a fault code of E6A or EA6, can anyone shine any light on this or am i barking up a wrongin. Cheers Paul.

    March 3, 2009 at 5:02 pm #279077
    electrofix
    Moderator

    Re: Zanussi TLE 1116w

    there is a mod on this when you get an ea6 code after 30 secs

    problem is with reed switch on the pulley

    have you got this info? if not give me your email

    and product code if you have it will send you info

    Dave

    March 3, 2009 at 5:11 pm #279078
    PGS
    Participant

    Re: Zanussi TLE 1116w

    Cheers Dave the appliance stops working after just a few seconds as if it hasnt sensed the pully senser

    March 3, 2009 at 5:18 pm #279079
    electrofix
    Moderator

    Re: Zanussi TLE 1116w

    mod shows packing the switch unit with washers to get it closer to the magnet but you have to grind injection tabs on back of pulley there are pictures no the bullitin

    need an email to send it to you

    Dave

    March 3, 2009 at 5:22 pm #279080
    PGS
    Participant

    Re: Zanussi TLE 1116w

    Dave Ive sent you a PM cheers.

    March 8, 2009 at 9:15 pm #279081
    PGS
    Participant

    Re: Zanussi TLE 1116w

    Ive cancelled the fault code on this machine and ran it 4 times over the weekend and fault has not re-ocurred. Could this fault on pulley senser be a 1 off or should I replace senser with mod kit. Any tips appreciated.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.