DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 3, 2009 at 6:10 pm #43926
    Minge
    Participant

    Hi,

    This dishwasher fills to one level, stops.. nothing happens, fills to second level, stops… and no noises/humming coming from motor etc…
    A minute or 2 later the dishwasher drains, beeps 3 times then one long bleep as though its finnished?

    I replaced pressure stat ( even though there are no wires going to it???) as i had one for this model but still same.

    Any ideas please???


    :rolls:

    March 4, 2009 at 8:23 pm #279103
    Penguin45
    Participant

    Re: DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

    Hmm – this one’s got a plug in it……..

    Chris.

    March 17, 2009 at 8:06 pm #279104
    Minge
    Participant

    Re: DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

    Whaty do the 3 beeps mean please?

    March 17, 2009 at 11:46 pm #279105
    Penguin45
    Participant

    Re: DIPLOMAT DISHWASHER ADP8322 fills and stops – 3 beeps

    The beeps can match the flashing start lamp – 3 suggests a heater circuit failure. Buirnt-out wiring at heater connector common, dead heater or safety stat and possible failure on PCB. Had one recently with wiring failure in door pivot point.

    It’s a Whirlpool – all code info is available in Known Error Codes Thread and teh UKW Fault Code Guide book.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.