candy dishwasher a8001

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › candy dishwasher a8001

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 10, 2009 at 7:15 pm #44112
    suedehead1
    Participant

    hi,
    the machine is not heating the heater is ok and so is the thermostat and thermistor.
    i changed the pcb 49003171 and there was a tech info sheet explaining to set it up for dishwasher with “water heating element in tank” or with “external water heating”.
    but i dont really know what difference it would make if i did it wrong.
    the bulletin is in pigeon english.
    thanks in advance.

    March 11, 2009 at 12:18 am #279811
    leavemetogetonwithit
    Participant

    Re: candy dishwasher a8001

    I would be inclined to think that you must have taken the wrong option and it’s worth re-setting(?) and trying it the other way. If it thinks it’s going to be fed with hot water then it’s probably not going to turn on its heater.
    Mike.

    March 11, 2009 at 12:19 am #279812
    Penguin45
    Participant

    Re: candy dishwasher a8001

    Internal heater is the floor mounted one. External heater is the one in the up-pipe to the top rotor. Both have safety thermostats in circuit…..

    Chris.

    March 11, 2009 at 8:06 am #279813
    suedehead1
    Participant

    Re: candy dishwasher a8001

    the heater is visible in the inside of the tank under the lower basket.

    March 11, 2009 at 7:30 pm #279814
    suedehead1
    Participant

    Re: candy dishwasher a8001

    i tried it both ways and it still doesnt heat i have told the customer to call candy.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.