MIELE T230C dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › MIELE T230C dryer

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 15, 2009 at 2:36 pm #44246
    trotter
    Participant

    Runs through the drying cycle (Normal) getting full current draw from heater – and heat!

    At end of cycle clothes are hot/damp. Checked for blockages inc condenser water is pumping okay into drawer. Tested for continuity between straps of sensor to drum – one to earth & one not, which I believe is correct?

    Cleaned sensors on inside of dryer, still the same results. Dryer appears to run through cycle perfectly well indicating each stage of drying – but clothes are not dry, just warm & damp.

    ANY IDEAS PLEASE?

    March 15, 2009 at 7:00 pm #280371
    trotter
    Participant

    Re: MIELE T230C dryer

    AND…………just to confuse things even more. I have just tried swapping the control board with another machine ….no difference! and the donor machine is still working perfectly :rolls:

    SEAMY…….Where are you ❓

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.