BEKO DRYER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO DRYER

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 20, 2009 at 6:12 pm #44409
    funkyboogy
    Participant

    MODEL DRCS68W

    when cottons auto dry selected runs for 2 mins then cuts off
    end/anticrease led flash,s
    works perfectly on all other progs

    cheers ally

    March 20, 2009 at 7:15 pm #280896
    Seamy
    Participant

    Re: BEKO DRYER

    Answer is there in your post.. its in an automatic programme.
    Either no clothes in drum,
    or clothes in drum dry enough
    or problem with sensor, worst case scenario PCB

    March 20, 2009 at 7:16 pm #280897
    smartin
    Participant

    Re: BEKO DRYER

    and if you decide on pcb make sure you get the serial number 😉

    March 20, 2009 at 8:25 pm #280898
    funkyboogy
    Participant

    Re: BEKO DRYER

    did have a look at sensor in drum , had bit of fluff in it nothing ott..
    it runs ok on other auto dry progs ..just not the cottons ?

    think will order pcb and sensor

    ally

    March 21, 2009 at 2:36 pm #280899
    Galway
    Participant

    Re: BEKO DRYER

    is it heating fully on other programmes .these heaters always giving problems.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.