zanussi ZWF10070W1 not programming

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi ZWF10070W1 not programming

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 2, 2009 at 8:39 am #44708
    Geoff1312
    Participant

    Hi All,

    Help required once again please. The above machine you can set the programme, Panel lights up correctly, Once start is pressed pump runs as normal but that is it, pump just keeps running. Have tried several different programmes including spin still the same. No fault lights.

    Any ideas please

    Thanks in anticipation
    Geoff

    April 2, 2009 at 8:57 am #282017
    Specialist01269
    Participant

    Re: zanussi ZWF10070W1 not programming

    Had this a couple of times in the last few weeks, both times it was caused by the heater being leaky to earth.
    Andy.

    April 2, 2009 at 10:46 am #282018
    Seamy
    Participant

    Re: zanussi ZWF10070W1 not programming

    Or faulty analogical pressure sensor, they are giving a load of problems too.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.