Hotpoint Washer Dryer WD860 Now no Power!!!!!!

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Washer Dryer WD860 Now no Power!!!!!!

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 11, 2009 at 1:27 pm #44930
    kenzo
    Participant

    the blooming thing wont work now no led or power illumination


    …..Tried reducing the water pressure still leaking from the drawer on wash and spin any ideas guys?
    Model no 31135b

    would be much appreciated as its my old mans and hes getting a bit annoyed cleaning the flooding 😡 😥 😥

    April 11, 2009 at 1:48 pm #282989
    helo_75
    Participant

    common problem

    clear the sump hose and all will be fine

    rear access panel off, black pipe from drum to pump

    will be full of fluff and stuff

    plug out, of corse

    April 11, 2009 at 1:59 pm #282990
    kenzo
    Participant

    Re: Hotpoint Washer Dryer WD860 leaks from drawer on spin

    thanks

    April 11, 2009 at 2:23 pm #282991
    kenzo
    Participant

    Re: Hotpoint Washer Dryer WD860 leaks from drawer on spin

    will give it a go mate thanx …also dad was asking is there a easy wasy to get the fan off the heater of the dryer as he cant find any fixing screws?

    April 11, 2009 at 3:11 pm #282992
    helo_75
    Participant

    its on a collet and a nut

    theoretically, if you undo the nut it shoud slide off

    but this is hootpoint we’re talkinabout

    April 13, 2009 at 5:25 pm #282993
    kenzo
    Participant

    Re: Hotpoint Washer Dryer WD860 leaks from drawer on spin

    Excellent advice as i knew it would be lads the sump hose was blocked with all sorts (not the liqourice type)unblocked and no more drawer leaks….
    Next problem is the fan is on a collet but we cant get it off how does this bloody come off?Any special tools required

    April 13, 2009 at 5:49 pm #282994
    iadom
    Moderator

    Re: Hotpoint Washer Dryer WD860 leaks from drawer on spin

    The nut has a left hand thread. 😉

    April 15, 2009 at 4:08 pm #282995
    kenzo
    Participant

    Re: Hotpoint Washer Dryer WD860 leaks from drawer on spin

    Fan heater problem sorted Drawer leak sorted….
    Now No power whatsoever 240 v ac going in okay! .this gets worse at every attempt to repair this machine. lol.any help would be thoroughlly appreciated.

    April 15, 2009 at 7:09 pm #282996
    helo_75
    Participant

    id first check the buttons on the front arent stuck ,thats the usual set up.. a good thing to check first, is unplug the machine, and after a couple of seconds, plug it back in , whilst watching the leds on the front.. they should light up momentariy

    oh, and id check the plug to the front board whilst uve been working in that area

    hth

    rob

    April 16, 2009 at 8:54 pm #282997
    kenzo
    Participant

    Re: Hotpoint Washer Dryer WD860 Now no Power!!!!!!

    machine is fooked lads ..hotpoint engineer had a look at it and its the power supply pcb thats gone ,so its a new machine for the old man ..thanks for all your help As always the site will get a big mention to all we know
    cheers
    kenzo

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.