whirlpool 10kg tumble dryer 3RAW2480EMQO

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool 10kg tumble dryer 3RAW2480EMQO

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 14, 2009 at 4:17 pm #44980
    Minge
    Participant

    Hi guys!

    This tumble dryer keeps blowing the small 6.3A fuse, any ideas please???

    The appliance mega’s up ok.

    When you turn the machine on and press start the drum moves for approx 1/8th of a turn then the fuse blows!

    April 14, 2009 at 5:05 pm #283183
    Specialist01269
    Participant

    Re: whirlpool 10kg tumble dryer 3RAW2480EMQO

    Hi: I don’t actually know these machines but does the fuse just melt or does it blow violently i.e blackened, if the fuse melts then you have an overload rather than a short. What does the fuse feed? is it by any chance on an Electronic control board.

    April 14, 2009 at 7:36 pm #283184
    boggoff
    Participant

    Re: whirlpool 10kg tumble dryer 3RAW2480EMQO

    I think the motor is trying to start in the run winding centrifugal switch on motor

    April 16, 2009 at 2:30 pm #283185
    Minge
    Participant

    Re: whirlpool 10kg tumble dryer 3RAW2480EMQO

    it blows black, not wexactly sure what it feeds?

    My initial feeling is motor, but the appliance mega tests ok.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.