DIPLOMAT ADP4520 1400 watt fan element

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › DIPLOMAT ADP4520 1400 watt fan element

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 15, 2009 at 9:15 am #44994
    cookerfit
    Participant

    I’ve got a couple of these to repair but have not been to site or seen one yet.
    The 1400 watt fan element seems to be very low wattage – does anyone know if it operates on its own or in conjunction with another element?
    They also seeem to have a high failure rate – is it just design, over use of the element because of its its low wattage to maintain temp or is there something else to be wary of???..

    Thanks

    Cookerfit

    April 15, 2009 at 5:14 pm #283229
    Jonah
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    The lower wattage is only because they can be fitted with a 13amp plug top if no 45amp circuit is available, in fact the first models that came out only had a 1kw fan element in them and were soon upgraded to 1.4kw as they were extremely slow in cooking, it is the only element in the main oven, top oven is a weird set up and is very slow there was a modified kit available for the top oven but very expensive, might still be available from AW Services.

    I have put in 2kw elements if appliance is connected to 45amp supply with no problems as the last versions produced did have a 2kw element fitted and could only be fitted to a normal cooker outlet, the ovens are made by Technogas for MFI so you can get pattern elements as well as genuine, hope this helps.

    April 16, 2009 at 10:23 pm #283230
    cookerfit
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    Thanks a lot for the info, I’m sure many other engineers doing work for D&G on MFI units will find it helpfull 😀

    Regards
    Cookerfit

    July 17, 2009 at 6:14 pm #283231
    mike412
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    Hi folks.

    I need one of these elements. CDSL advises now obsolete, anyone know a part number source for a pattern spare. (or got a genuine on the shelf).

    Many Thanks,

    Mike.

    July 18, 2009 at 8:47 am #283232
    Jonah
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    Part Number 524021800 1400W Fan Element
    Email AW Services on: awservices1@btinternet.com

    July 18, 2009 at 7:11 pm #283233
    mike412
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    Thanks for that Jonah- email is winging its way now.

    Regards, Mike

    July 19, 2009 at 12:08 am #283234
    kwatt
    Keymaster

    Re: DIPLOMAT ADP4520 1400 watt fan element

    mike412 wrote:I need one of these elements. CDSL advises now obsolete, anyone know a part number source for a pattern spare. (or got a genuine on the shelf).

    It’s not obsolete. 😕

    Rubbish picture (yes I took it, I’ve gotten better since then) but it is HERE and can be ordered from AW or Masterpart, both stock it so far as I know. It’s a stock line for us as well. Not cheap, but available.

    HTH

    K.

    July 20, 2009 at 7:12 am #283235
    hyg-dip
    Participant

    Re: DIPLOMAT ADP4520 1400 watt fan element

    Hi

    Part in stock at AW Services 01603 630258

    Andy

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.