APM8521 (Servis) 800 spin spider bolts/rivets/fixings?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › APM8521 (Servis) 800 spin spider bolts/rivets/fixings?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 15, 2009 at 1:49 pm #44998
    leavemetogetonwithit
    Participant

    I’m going to do this tomorrow if Citylink are as reliable as they usually are. It’s one of those thin 4 legged spiders as used on some old Bendix etc.
    Not done one of these before. I suspect the old one may be held on with solid rivets or something? Anyone know what bolts I’ll be best to take along and are the old rivets a pain to get out?
    Mike.
    Edit: Sorry, meant to post in Technical Enquiries if there’s a mod around?

    April 15, 2009 at 7:35 pm #283242
    Penguin45
    Participant

    Re: APM8521 (Servis) 800 spin spider bolts/rivets/fixings?

    8 x M6/24mm, washers and nylocks. Easy peasy.

    Chris.

    (Moved, passing Mod around…. 😀 )

    April 15, 2009 at 10:04 pm #283243
    leavemetogetonwithit
    Participant

    Re: APM8521 (Servis) 800 spin spider bolts/rivets/fixings?

    Brilliant. Just what I needed to know! (Though I’ll believe the easy bit when it’s done and dusted.)
    Cheers Chris,
    Mike.

    April 15, 2009 at 11:35 pm #283244
    Penguin45
    Participant

    Re: APM8521 (Servis) 800 spin spider bolts/rivets/fixings?

    leavemetogetonwithit wrote:(Though I’ll believe the easy bit when it’s done and dusted.)

    Angle grinder, then the drill……. 😆

    “It’s real engineering, Mrs!”

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.