- This topic has 25 replies, 6 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
hi hope you can help, i have just aquired an electra awm1100b eco 2nd hand washer. Im a plumber by trade and wondered that with a little assistance we could fix it.
ok plugged/plumbed it in, selected the first program ‘A’ and switched machine on. the power light indicator came on and then nothing.
i then manually moved the program selection dial around to each individual program to see if it would do anything at the begining of each program but still nothing.
have tested main power coming into machine and ok.
ive checked the door switch – ok
ive checked solanoids – ok
there are no signs of electrical damage on pcb or near componentsshould i be hearing a ticking noise from this timer? as it is silent.
please help :0)
Re: electra awm1100b eco has power/water but does nothing
The Electra ‘brand’ was made by many different manufacturers for the old Electricity Boards.
Yours is possibly a Philips/Whirlpool machine.
Motor brushes would be the first thing to check, unplugged of course. 😉
Jim.
Re: electra awm1100b eco has power/water but does nothing
hi, thanks for your speedy response. :0)
ive taken the motor out but can find no sign of brushes?!?
this is the sticker on the motor >
Re: electra awm1100b eco has power/water but does nothing
A picture of the motor would have been better, 😉
I am more conversant with the Hoover/Hotpoint/Creda/Zanussi made, Electra branded machines TBH.
I am not sure if any of the Whirlpool, Servis or other manufacturers used three phase motors. It may even be a very old type induction motor.
Whatever it is, its quite an old machine now.
Jim.
Re: electra awm1100b eco has power/water but does nothing
a picture of the washing machine would be better.if it has no brushes and a v belt it is either a servis or a whirlpool the door lock might be faulty i dont know any way of checking it without replacing it.
Re: electra awm1100b eco has power/water but does nothing
hi sorry, yes i should have posted more pics,
and yes it does have a ‘v’ belt :0)
hope these help more>
Re: electra awm1100b eco has power/water but does nothing
its a servis i think it will be the door lock.
Re: electra awm1100b eco has power/water but does nothing
ok ive put the machine back into ready to use order, motor back, water/power etc and removed the door lock to manually activate it.
the door lock acts as expected when it is ‘fooled’ into making.
the safety solanoid lock within the door lock activates, but the machine still sits waiting and doing nothing :0(any help gratefully received
Re: electra awm1100b eco has power/water but does nothing
suedehead1 wrote: the door lock might be faulty i dont know any way of checking it without replacing it.
😉Re: electra awm1100b eco has power/water but does nothing
So the door locks and nothing happens?
Take a picture of the printed circuit board for us.
If the board has 2 large white resistors on it then these are the next thing to check.
Power off!
Re: electra awm1100b eco has power/water but does nothing
that sounds right tim i thought it was one of the older machines with the 8 tags on the bottom but its more likely the usual servis door locks but nothing else pcb fault.
Re: electra awm1100b eco has power/water but does nothing
2 Large white Ceramic resistors to left of Aluminium heatsink.
Values are printed on them, use a multimeter to check resistance of both.Re: electra awm1100b eco has power/water but does nothing
hi checked both resistors, they are both rated 6.2kohm
and both register 5.6kohm on my meter :0)
- You must be logged in to reply to this topic.