S25B-RSS31 – how to remove door with water pipe?

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › S25B-RSS31 – how to remove door with water pipe?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 23, 2009 at 10:11 pm #45202
    Graphite
    Participant

    I have a whirlpool S25B-RSS31 fridge freezer and I need to remove the doors to move it.

    There is a water pipe running through the middle of the lower hinge on the left hand door – how do I disconnect it?

    Thanks 😆

    April 23, 2009 at 10:26 pm #283996
    kwatt
    Keymaster

    Re: S25B-RSS31 – how to remove door with water pipe?

    Not familiar with that specific model but most would have a push-fit connector on the pipe somewhere around the point where the pipe enters the door so you can release the pipe to remove the door.

    HTH

    K.

    April 24, 2009 at 7:05 am #283997
    Dales-Electronic
    Moderator

    Re: S25B-RSS31 – how to remove door with water pipe?

    Remove bottom kick-strip and as Ken says disconnect water supply pipe at ‘push-fit connector

    April 24, 2009 at 11:23 am #283998
    Graphite
    Participant

    Re: S25B-RSS31 – how to remove door with water pipe?

    Thanks – that was spot on 😀

    A bit tricky to get the thing apart in that position LOL 😆

    I will post some pics later incase anyone else has the same problem.

    I took the opportunity to remove a few ‘skip fulls’ of dust and fluff out of the thing whilst i had the kick panel off 😳 😆

    Thanks guys! 8)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.