smeg 50×80 range cooker

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › smeg 50×80 range cooker

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 24, 2009 at 9:15 pm #45222
    tradesite
    Participant

    Changed the fan oven element on this cooker as the original had a hole in it. The wiring has been put back right but when the selector is switched to fan oven I get no supply to the element. When I select the bottom oven element and fan selection they work but I also get a supply to the fan oven element but the element does not get hot enough.
    Any suggestions?

    Regards.

    Nigel.

    April 24, 2009 at 9:57 pm #284089
    clivejameson
    Participant

    Re: smeg 50×80 range cooker

    We’ve had plenty of these with failed selector switches..usually down to loose connections which can also happen elsewhere particularly the connector blocks at the back 😉

    April 26, 2009 at 11:09 am #284090
    tradesite
    Participant

    Re: smeg 50×80 range cooker

    Thanks! Will take a look at that next week.
    Will let you know how I get on.

    Regards.

    Nigel.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.