Hoover AI130 w/m

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover AI130 w/m

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 29, 2009 at 4:31 pm #45332
    Galway
    Participant

    hi ,this machine sometimes not taking water in quick enough and error2 coming up valves ok, pressure chamber clear but motorised selector noisy .customer says if she keeps selecting programme it will eventually do the job.will replacing this selector do the job.
    Thanks

    April 29, 2009 at 9:55 pm #285364
    leavemetogetonwithit
    Participant

    Re: Hoover AI130 w/m

    Is it a problem of low water pressure? If so just pull the rubber restrictor washer and its plastic thing out of the water valve. (That’s assuming they still have them, some time since I last looked).
    Mike.

    April 29, 2009 at 9:57 pm #285365
    LJDomestics
    Participant

    Re: Hoover AI130 w/m

    Also check the valve feed under the sink if its there.. might of been “knocked” when shes been in and out for things.. or inlet pipe kinked?

    April 30, 2009 at 8:13 am #285366
    Galway
    Participant

    Re: Hoover AI130 w/m

    these are all ok .im still thinking of the noisy selector switch! 😕

    April 30, 2009 at 11:59 am #285367
    Martin
    Participant

    Re: Hoover AI130 w/m

    Galway wrote:these are all ok .im still thinking of the noisy selector switch! 😕

    Very likely.:tup:

    April 30, 2009 at 1:21 pm #285368
    Galway
    Participant

    Re: Hoover AI130 w/m

    thanks will change and see what happens or doesn’t.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.