- This topic has 3 replies, 3 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
Model SGS5302/GB/07…FD7711
Switched on and F appears in display and drain pump runs.
Fill valve OK, all internals perfectly clean, not a sign of gunge anywhere.
She said that the programme option buttons have been failing one by one for the past few months. Now only Normal & Eco buttons seem to have any effect and that is only lighting up the light above the button, nothing else.
Pressing and holding down Intensive & Eco has no effect, it is impossible to reset or clear the display.
Thinking that the PCB is goosed, any other ideas?
Jim.
Re: Bosch D/W showing F
iadom wrote:Pressing and holding down Intensive & Eco has no effect, it is impossible to reset or clear the display.
More than likely due to the plastic contacts broken off the module housing (Pt No: 294946) I would imagine? New housing should at least re-establish all the programme buttons again. Testing the module outside of the door panel fairly easy to check with door shut and switched on and resetting may cure the error?
F in the display relates to a fill problem, I think? But not sure as I’ve never come across it before – sorry. 🙁
Re: Bosch D/W showing F
F is normally a flooded base, or overfill s/w sticking.
When the base is drained it will take a while for the F to disappear, just set it away and it will go (honest) 8)
- You must be logged in to reply to this topic.