- This topic has 9 replies, 5 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
Re: hotpoint rla33 thermostat
Morer than likely the tube the phial shoves into has moved, there was a problem with some of them moving causing them to freeze up.jj
Re: hotpoint rla33 thermostat
(I don’t write them off you can take out the insulation at the back where the stat phial sits and reposition the phial so that is fastened to the evapoartor.Done it a few times now and works spot on,not origional spec of course,possibly better !
I did post on this http://www.ukwhitegoods.co.uk/modules.p … ic&t=43429Re: hotpoint rla33 thermostat
This one didn’t need a thermostat just repositioned the phial through the evaporator held down with a length of plastic.
Hotpoint RLA64
<img src="…
…” alt=”” style=”max-width:100%;” />
AEG Santos having changed from electronic control to VT9 housed in a small splash proof plastic box from CPC
<img src="
” alt=”” style=”max-width:100%;” />Re: hotpoint rla33 thermostat
feel the liner at the back, will be loose, you can push it in……..write off
Re: hotpoint rla33 thermostat
Always feel the liner first it’s fine on the htpt,although not alwways the case, it’s the thermostat phial location tube on this one has come away,gaffer tape would have done a better job when manufactured :rolls: write off,not this one.
On the Santos the evap is 1/2″ forward from the back of the fridge so no problem there either.
BG
…” alt=”” style=”max-width:100%;” />
” alt=”” style=”max-width:100%;” />
- You must be logged in to reply to this topic.