- This topic has 1 reply, 2 voices, and was last updated 16 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
The dryer on this machine starts off ok gets hot then heater cuts out.
Stat still has continuity and has not tripped.
Tracing the wire from the heater down to the triac module on base plate.
Could this be the culprit?? No visual sign of damage.
Problem has been intermittent for some time.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.