Zanussi ZT 695 flashing lights

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi ZT 695 flashing lights

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 29, 2009 at 1:59 pm #46065
    phunky_saz
    Participant

    I’m sorry if the answer is already in the forum somewhere but I did look and couldn’t find anything.

    My daughter turned on the diswasher last night and when i got up this morning it hadn’t done anything the rinse and hold button was/is flashing no matter what cycle i put it on.

    My manual doesn’t have any error codes in it so a bit stuck.

    Any help would be great

    Thanks

    May 29, 2009 at 7:06 pm #288073
    silverbroom
    Participant

    Re: Zanussi ZT 695 flashing lights

    This is classed as an L1 error.

    Eight different probs, but suspect anti flooding device as first port of call.

    First unplug machine to make safe.

    As in most situations dishwasher will be slotted in below worktop, pull out and put a towel at the rear of appliance then tip back 45{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, water may come out (reason for towel) if so this confirms overflow to sump tray.

    Stop using tablets and go back to powder.

    If this does not cure problem click on Find an engineer as you have done as much as you can without further expert advice.

    silverbroom

    May 30, 2009 at 6:24 am #288074
    phunky_saz
    Participant

    Re: Zanussi ZT 695 flashing lights

    Thanks it appears to be working now 🙂 I really didn’t want to have to pay for an engineer!!

    Is there anywhere where you can get the list of error codes so I know what i’m dealing with next time?

    Thanks again 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.