Zanussi ZT 695 flashing lights

[phunky_saz]

I’m sorry if the answer is already in the forum somewhere but I did look and couldn’t find anything.

My daughter turned on the diswasher last night and when i got up this morning it hadn’t done anything the rinse and hold button was/is flashing no matter what cycle i put it on.

My manual doesn’t have any error codes in it so a bit stuck.

Any help would be great

Thanks

[silverbroom]

Re: Zanussi ZT 695 flashing lights

This is classed as an L1 error.

Eight different probs, but suspect anti flooding device as first port of call.

First unplug machine to make safe.

As in most situations dishwasher will be slotted in below worktop, pull out and put a towel at the rear of appliance then tip back 45{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, water may come out (reason for towel) if so this confirms overflow to sump tray.

Stop using tablets and go back to powder.

If this does not cure problem click on Find an engineer as you have done as much as you can without further expert advice.

silverbroom

[phunky_saz]

Re: Zanussi ZT 695 flashing lights

Thanks it appears to be working now 🙂 I really didn’t want to have to pay for an engineer!!

Is there anywhere where you can get the list of error codes so I know what i’m dealing with next time?

Thanks again 😀

[Author]

Posts