- This topic has 5 replies, 5 voices, and was last updated 16 years, 10 months ago by
.
-
Posts
-
I need to replace a drain hose from my Hotpoint Aquarius DWF32 dishwasher but I can’t work out how to get inside the machine. I have trawled the internet looking for the answer but with no joy. I can’t work out where the access panel is.
I am reluctant to call out an engineer for what will be a 5 minute job once I can access the pump.
Any suggestions would be gratefully recieved.Re: Getting inside Hotpoint DWF32
Remove baskets, filters and bottom rotor. Bail out as much water as you can. There is a single Torx screw in the floor of the sump, at about the 11o’clock position. Remove it, then pull the tab sticking up towards you to remove the drain pump cover.
Penguin45.
Re: Getting inside Hotpoint DWF32
❓ hi , got a hole in the drain hose and need to replace it, but like the person above, can not see how to remove the top so i can get the side off, please can anybody help me, does it slide forward with a bit of force ❓
Re: Getting inside Hotpoint DWF32
Two small lugs underneath the top at the back, push these in with a flat bladed screwdriver and then push top forwards.
Sent from my iPad using Tapatalk HD
- You must be logged in to reply to this topic.