Bosch Maxx – starts but just sits there after water

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bosch Maxx – starts but just sits there after water

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 1, 2009 at 8:17 am #46101
    j0mpst0rt
    Participant

    Hi,

    I have an WFO2460 – – Bosch Maxx Super

    It worked fine to recently and then just stopped as follows:


    Start my normal cycle, the timer comes on, the click engages, the water goes in from the cold, and then it….. Sits there.
    The timer continues to gp dpwm, but drum doesn’t turn and at end the water is still in the drum. I can use drain option to get the water out, and I can then open the door.

    Any pointers please?

    Michael.

    June 1, 2009 at 9:26 am #288237
    kwatt
    Keymaster

    Water heater… carbon brushes… motor… timer… pressure switch…

    What have you checked thus far? I also don’t get the “gp dpwm” bit.

    K.

    June 1, 2009 at 6:25 pm #288238
    gandh1
    Participant

    kwatt wrote:I also don’t get the “gp dpwm” bit.

    thats klingon for “go down” 8)

    June 1, 2009 at 10:18 pm #288239
    nomadPaul
    Participant

    90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure to be the motor brushes worn. you will need to remove the motor to check the lenght left on the brushes –

    June 1, 2009 at 11:29 pm #288240
    Penguin45
    Participant

    Re: Bosch Maxx – starts but just sits there after water

    Article.
    Replacement Brushes.

    Penguin45.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.