zanussi jetsystem 1250 clock/ programmer stop

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › zanussi jetsystem 1250 clock/ programmer stop

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 6, 2009 at 12:56 pm #46251
    robbieesprit
    Participant

    Hi All

    HAVE HAD THIS MACHINE SINCE NEW AND HAS DONE ME REALYY GOOD SERVICE BUT RECENTLY WHEN SELECTING A WASH CYCLE THE PROGRAMMER SEEMS TO STOP, YOU CAN THEN CLICK IT ON A TOUCH BUT THEN IT WILL STOP AGAIN, ALSO WASH QUALITY HAS REALLY DROPED OFF ANY IDEAS OF HOW TO FIX? MANY THANKS ROB.

    June 6, 2009 at 9:04 pm #288685
    aqualectric
    Participant

    Re: zanussi jetsystem 1250 clock/ programmer stop

    Stopping on the wash cycle will usually point to heater element failure. Wash quality will be affected.
    One quick test is to set the machine on a hot cycle and after about fifteen minutes check the door glass for warmth. You can also hear the heater “sing” if you open the dispenser and put your ear to the soap drawer. It’ll sound like a kettle boiling.
    If no noise is heard and no heat is felt on the door glass, it is probably the heater.
    Power off if you are to investigate…….:plug:

    Steve.

    June 6, 2009 at 9:09 pm #288686
    Simon46
    Participant

    Re: zanussi jetsystem 1250 clock/ programmer stop

    how many times does it have to be moved on during cycle?

    S.

    June 7, 2009 at 12:08 am #288687
    Penguin45
    Participant

    Re: zanussi jetsystem 1250 clock/ programmer stop

    Model number and pnc code would help……… label above door seal.

    Penguin45,
    Moderator.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.