BOSCH f/f frozen solid

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH f/f frozen solid

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 7, 2009 at 9:10 pm #46273
    Kirk
    Participant

    KGN34V00GB/02 FD8610, is this one of the units that you can’t change sensor in?

    The freezer is frozen solid I defrosted it but can’t lift it up to slide out,I have never had one this stuck before.

    The sensor at the bottom of freezer compartment is I believe a temp one, nothing to do with defrost?

    Thanks Kirk

    June 7, 2009 at 9:22 pm #288771
    helo_75
    Participant

    theres 3 mods for that

    takes ages to defrost it
    if its fully defrosted. 2 screws and it pulls out easily

    will require heater plate, drain heater and pcb

    June 7, 2009 at 9:59 pm #288772
    boselecta
    Participant

    Bosch advise not to defrost this range with a steamer. Advise customer to defrost for 48hrs before removing evap cover.

    June 8, 2009 at 7:50 pm #288773
    Kirk
    Participant

    Re: BOSCH f/f frozen solid

    Thanks both of you but need part number for pcb does it blow or is it modified ?

    helo_75
    I have removed the 2 screws defrosted it fully but it wont pull out you can see the 2 lugs that need to be lifted out of thier slots but the B….. won’t. budge, I have lifted the unit of the floor trying, it has been repaired before.

    Thanks Kirk

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.