Bosch Toploader

This topic has 2 replies, 2 voices, and was last updated 16 years, 10 months ago by Phidom.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
June 11, 2009 at 9:46 pm #46329

Phidom
Participant

WOK2001GB/05 has an open circuit coil on the double cold fill valve. Has anyone changed one of these and can offer any advice as it is far from obvious how you get the thing off? 😕

June 12, 2009 at 12:00 am #288958

Penguin45
Participant

Re: Bosch Toploader

Side panel off, lift tab and slide… Awkward, not difficult (Haven’t done one for a while. 263330 is the valve, BTW.

Chris.

June 12, 2009 at 10:55 am #288959

Phidom
Participant

Re: Bosch Toploader

Thanks Chris. I normally just change the coil but in this case I don’t have anything that will fit. I will keep the good coil off this one though so if I ever get the same fault on the same model I will be prepared!
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.