ISE 5 – where’s it gone

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › ISE 5 – where’s it gone

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 22, 2009 at 3:44 pm #46541
    Xileno
    Participant

    The ISE 5 seems to have been discontinued. Why?
    I would like an ISE but the ISE 10 is too big, it’s too deep to fit in. 🙁

    June 22, 2009 at 3:59 pm #289927
    kwatt
    Keymaster

    Re: ISE 5 – where’s it gone

    Hi Xileno,

    Since the world was turned upside down we had to make changes. Basically the value of the Pound fell through the floor against the Euro which pushed up the production costs too much plus, we didn’t like some of the changes that the factory were making.

    So, we changed the spec and replaced the machine with the AW23 which you can buy, from the links here with a five year warranty or, if you want, with a two year warranty

    The only thing that the AW23 loses out on, in the real world, is that it has a 1400rpm sin as opposed to a 1600rpm spin.

    HTH

    K.

    June 23, 2009 at 11:51 am #289928
    Xileno
    Participant

    Re: ISE 5 – where’s it gone

    ah that’s good news. The AW23 looks good, at only 505mm deep it will be perfect.
    I assume the motor is brushless?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.