Hoover Experts Help Required! Hoover HNF 6167

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover Experts Help Required! Hoover HNF 6167

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 23, 2009 at 6:11 am #46561
    neilsukwg
    Participant

    Need to change Drum Paddels (Lifters) on this machine. They are fixed on with small torx screws which are off set to the sump hose hole.

    Looks like a nightmare job?

    Any tips or expert advice welcomed…

    June 23, 2009 at 8:44 am #289983
    RocketMan
    Participant

    Re: Hoover Experts Help Required! Hoover HNF 6167

    http://www.ukwhitegoods.co.uk/modules.p … &highlight

    this might help

    June 24, 2009 at 5:52 am #289984
    neilsukwg
    Participant

    Re: Hoover Experts Help Required! Hoover HNF 6167

    Thanks for that info and the link,

    Never thought of checking the steam vent which like the sump gives you offset access to the paddle screw at the top of the drum. Armed with a good quality torx T10 (Bahco) and a quarter inch wiggle bar, the first paddle was off in minutes!

    Would probably be a good idea for any one interested to check this job out in advance next time you scrap a Hoover.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.