SAMSUNG SR- L 3928B

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › SAMSUNG SR- L 3928B

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 25, 2009 at 9:20 am #46614
    antonymat
    Participant

    Hi Guys,

    Can you give some advice on my fridge freezer please. It works, once it cuts off, it doesnt restart. I can manually make it to work by switching the power off and starting again. I got an engineer to have a look. He said it is to do with PCB (I believe it is the brain). He replaced it (130+40service charge). Hasnt made any change. I managed to get him to change the PCB back. Any ideas?

    June 25, 2009 at 1:21 pm #290143
    kwatt
    Keymaster

    Re: SAMSUNG SR- L 3928B

    I’m not too familiar with the machine but, is the compressor very warm when it cuts out?

    My thinking is that it could be overheating and cutting out on the TOC which you’re resetting by power cycling. If that’s the case it will be either the compressor or relay/klixon if it’s not one of the newer electronic affairs that’s on it.

    K.

    June 25, 2009 at 5:54 pm #290144
    antonymat
    Participant

    Re: SAMSUNG SR- L 3928B

    Thanks for that
    How do you open the back side of fridge? Mine has a small metal window at the bottom which can be unscrewed, and has a big metal panel covering everything else. This looks sealed. Any ideas

    June 25, 2009 at 7:34 pm #290145
    johnsdad
    Participant

    Re: SAMSUNG SR- L 3928B

    If it runs for 5-6 hours before cutting out, it will be a defrost fault (either thermal fuse or defrost heater).
    p.s. is this a spanish bought appliance? I don’t think this model was for uk?

    June 28, 2009 at 12:57 am #290146
    chippo
    Participant

    Re: SAMSUNG SR- L 3928B

    What temp is the display panel reading for the fridge and freezer as one or both thermistors could be faulty.

    June 29, 2009 at 11:24 am #290147
    antonymat
    Participant

    The freezer is set at-19. When you switch the power off it goes blank and it needs to be reset.
    It is actually an UK model

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.