candy cfd 612-80 error code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › candy cfd 612-80 error code

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 27, 2009 at 1:00 pm #46665
    linrew
    Participant

    hi,

    candy CFD612-80
    320003360726 0902
    GIAS01/P21

    any ideas what the wash light and rinse light comming on and the alarm sounding all at the same time is indicating,

    its been way to long since i worked on these so i have forgotten 😕

    many thanks

    linrew

    June 27, 2009 at 2:13 pm #290449
    Penguin45
    Participant

    Re: candy cfd 612-80 error code

    Is that lamps 1 + 3?

    Penguin45.

    June 28, 2009 at 7:47 am #290450
    linrew
    Participant

    Re: candy cfd 612-80 error code

    hi

    it is lamps 2 and 3

    thank you

    June 28, 2009 at 9:12 am #290451
    Penguin45
    Participant

    Re: candy cfd 612-80 error code

    It’s a Chinese one – the lights lit do not match any known error code. Standard faults on these are heater circuit and water level problems – this one uses a flow meter rather than a pressure switch.

    Failing that, the pcb has corrupted if you cannot reset it.

    Penguin45.

    June 28, 2009 at 11:33 am #290452
    linrew
    Participant

    Re: candy cfd 612-80 error code

    hi

    many thanks for the reply

    the machine appears to be filling fine and then heating all ok

    i will look into it further and ask if i need more advise

    thank you for your quick response

    linrew

    June 29, 2009 at 7:10 pm #290453
    linrew
    Participant

    Re: candy cfd 612-80 error code

    hi

    i have ran this machine a couple of times over the weekend and it now appears to go through most of the wash (fills, heats,washes and rinses) the gets near the end and light 2 (wash) flashes the alarm sounds and the machine empties for 2 mins then stops

    any ideas please as its a very very long time since i worked on candy

    i know it will be something stupid that i am missing

    linrew

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.