AEG W/M no spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG W/M no spin

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 29, 2009 at 6:11 pm #46706
    mackos
    Participant

    Hi not had alot to do with AEG w/m’s but got one that doesn’t want to spin it washes ok but wont go into spin not even the distrbution spin.checked the two pressure switches & vipler hoses they seem fine tried it empty so it’s not a balance problem.What’s the likely culprit on these motor or module.Thanks Mack.

    June 29, 2009 at 6:14 pm #290572
    timdowning
    Participant

    Re: AEG W/M no spin

    Did you insulation test the machine?

    Particularly the heater.

    Other than that, more likely the module.

    June 29, 2009 at 6:26 pm #290573
    mackos
    Participant

    Re: AEG W/M no spin

    Hi Tim no I didn’t do an insulation test or check the the heater I will try that tomorrow.Thanks Mack.

    June 29, 2009 at 10:36 pm #290574
    leavemetogetonwithit
    Participant

    Re: AEG W/M no spin

    How old is it? Brushes are the most common fault on older ones. (IMLE)
    =in my limited experience. Guess you must live in a hard water area as you’re checking pressure switches.
    Mike.
    PS, You’ll get fewer replies if you don’t give a model no.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.