Fisher Paykel GW608 one second beeps and 01101000 104 code

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › Fisher Paykel GW608 one second beeps and 01101000 104 code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 1, 2009 at 12:52 am #46745
    MAR01
    Participant

    Current problem is it beeps at one second intervals, and gives fault code
    01101000 = 104 on the lights (Model GW608). Anyone with any ideas of how to fix the problem.’Brooksi’ said he fixed the problem in a previous post but doesn’t explain how he did it.
    When I turn power on at the socket to the machine…the pump is continuously running. If I pour water into the machine the pump will empty the water. If I lift the lid, the pump stays running.

    Any help would be really appreciated.

    July 1, 2009 at 10:52 pm #290727
    bigsmokepiker
    Moderator

    Re: Fisher Paykel GW608 one second beeps and 01101000 104 co

    From pas t experience seems like a motor controller fault(Main PCB)
    If pump running all the time PCB is sending power to pump continously
    Part 426204p About $200.00 AU

    July 1, 2009 at 11:21 pm #290728
    MAR01
    Participant

    Re: Fisher Paykel GW608 one second beeps and 01101000 104 co

    Thanks for your reply. I have phoned a repair guy and will update on how it was fixed.
    Thanks again…really appreciated

    July 3, 2009 at 12:04 am #290729
    MAR01
    Participant

    Re: Fisher Paykel GW608 one second beeps and 01101000 104 co

    Appliance guy called and fixed the machine. It was the motor controller as suggested. Thanks bigsmokepiker for the advise. Much Appreciated
    Total cost NZ$216

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.