hoover d/w fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover d/w fault

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 2, 2009 at 12:52 pm #46776
    mackos
    Participant

    Hi got a Hoover d/w HED 60/80 type CANDY7A the machine stops at various places through the cycle with the first two lights on(pre-wash & wash) according to the blurb thats a fill problem.There doesn’t appear to be a pressure problem with the water or with the E valve.Any thoughts anyone.Thanks Mack.

    July 2, 2009 at 4:31 pm #290856
    bzz67
    Participant

    Re: hoover d/w fault

    there is a water meter on the air break behind the the LHS panel, the connector plug needs to be cut off and wires soldered directly onto tracks to stop poor connection problems, then protect your solder joints with silicone to prevent tracking when damp. this is a brief explination of a technical fault report, not one i have seen myself yet.
    hope this helps

    July 2, 2009 at 9:07 pm #290857
    mackos
    Participant

    Re: hoover d/w fault

    thanks bzz67 i will give that a try & let you know how it goes.cheers Mack.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.