Samsung j1453s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung j1453s

Viewing 15 posts - 1 through 15 (of 22 total)
1 2
  • Author
    Posts
  • July 10, 2009 at 9:16 am #46951
    electrofix
    Moderator

    have been to this machine and no matter what i do i cant stop the soap draw leaking
    has anyone had this problem on this machine or the like and is there a simple cure

    am trying to souce a complete draw body but hitting brick walls a mo

    thanks

    Dave

    July 10, 2009 at 9:56 am #291592
    philfish
    Participant

    Re: Samsung j1453s

    Is the water pressure to high? just a thought otherwise would say its a new dispenser 😥

    phil

    July 10, 2009 at 11:38 am #291593
    electrofix
    Moderator

    Re: Samsung j1453s

    tried turning water down still leaks

    thanks

    Dave

    July 10, 2009 at 12:05 pm #291594
    andy2
    Participant

    Re: Samsung j1453s

    Assume you have checked if the machine is level and not leaning forward?

    You could try packing it up at the front to run the water towards the rear of the dispenser (assuming the outlet is at the back).

    Also is the SD hose completely clear? Some machines have a “u” bend shape hose and can become blocked or restricted with undissolved powder

    Andy

    July 11, 2009 at 9:53 am #291595
    robbo1973
    Participant

    Re: Samsung j1453s

    if you take the hose disp hose off from the tub by taking off door seal from front face there is a little flap which can either stick a bit or i have had items partially or totally stuck behind it causing soap drawer to leak.

    cheers chris

    July 11, 2009 at 10:13 am #291596
    robbra
    Participant

    Re: Samsung j1453s

    I had one, tried all the wrinkles to fix it over a couple of days. In the end fitted a new soap drawer top and cured it immediately so having had a couple more I just do that.
    Rob

    July 11, 2009 at 6:34 pm #291597
    LJDomestics
    Participant

    Re: Samsung j1453s

    is the spray nozzles inside the dispenser box all black and gunged up? possibly squirting the inlet of water into a direction that allows it to escape?

    July 11, 2009 at 6:37 pm #291598
    LJDomestics
    Participant

    Re: Samsung j1453s

    a possible clue as to they are clogged is remove the lid of machine and look around the seam of the dispenser outer ( box ) if u see dried soap powder around the seam assume a blockage.

    A good flush out by removing and cleaning with boiled water normally works for me.

    July 11, 2009 at 6:58 pm #291599
    timdowning
    Participant

    Re: Samsung j1453s

    I agree with Rob.

    Change the dispenser upper assy. When I did in-guarantee work for Samsung this was the only way to sort it.

    I did loads of pratting about, at first, with pressure, machine levels & cleaning none of it worked with these Samsung machines.

    July 11, 2009 at 10:45 pm #291600
    robbra
    Participant

    Re: Samsung j1453s

    Thanks Tim,
    Nice to have backup.
    Not worth the pratting about cleaning ‘cos it don’t work
    Rob 😆

    July 13, 2009 at 7:27 am #291601
    LJDomestics
    Participant

    Re: Samsung j1453s

    robbra wrote:Thanks Tim,
    Nice to have backup.
    Not worth the pratting about cleaning ‘cos it don’t work
    Rob 😆

    pratting about?

    i cal it “service”

    oh well. 8)

    July 13, 2009 at 8:31 am #291602
    robbra
    Participant

    Re: Samsung j1453s

    Well LJ,
    If it doesn’t work, as I have found on this model a few times, then it isn’t service it’s a waste of mine and the customers time so it is a new soap dispenser top every time. It’s down to experience on this machine ,which is what Dave was after in the first place. Perhaps you know otherwise.
    Rob

    July 13, 2009 at 11:09 am #291603
    timdowning
    Participant

    Re: Samsung j1453s

    LJ you must stop being so sensitive.

    My ‘pratting about’ comment was in regards to these Samsung machines, not to all makes and models.

    I find cleaning, levelling, poking, adjusting, jabbing, staring & SERVICING does work on many other makes.

    🙂

    July 13, 2009 at 5:57 pm #291604
    leavemetogetonwithit
    Participant

    Re: Samsung j1453s

    timdowning wrote:I find cleaning, levelling, poking, adjusting, jabbing, staring & SERVICING does work on many other makes.

    🙂
    Often, I just walk in the door and it fixes itself. 😆
    Mike.

    July 13, 2009 at 9:29 pm #291605
    robbra
    Participant

    Re: Samsung j1453s

    🙂

    leavemetogetonwithit wrote:
    Often, I just walk in the door and it fixes itself. 😆
    Mike.

    Big ‘ed 😆
    Can I borrow you for an outer tub change on a San Georgio?
    R

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 22 total)
1 2
  • You must be logged in to reply to this topic.