CRUSDADER CT61C condenser dryer

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › CRUSDADER CT61C condenser dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 10, 2009 at 11:46 am #46955
    justrying
    Participant

    Hiya

    i have a crusader Model CT61C condenser dryer that has stopped blowing hot air..the drum turns but cold air only. 🙁

    what could be the problem and do you know who the manufactures are please.

    Many thanks

    July 10, 2009 at 3:19 pm #291632
    iadom
    Moderator

    Re: CRUSDADER CT61C condenser dryer

    Made by GDA ( Hotpoint/Creda )

    THIS is almost certainly what you need.

    Be sure to pull the plug and test the old thermostats with a suitable meter first.

    Stats can fail due to age, blocked condensor or switching the dryer off mid cycle to check on the clothes. You should always allow it to do the ten minute cool down at the end.

    Jim.

    July 13, 2009 at 7:57 am #291633
    justrying
    Participant

    Re: CRUSDADER CT61C condenser dryer

    many thanks for the reply and i had a look at the back and it does look the same component as that on the picture.

    I will be ordering it ! Many many thanks ! 😉

    July 13, 2009 at 9:46 am #291634
    iadom
    Moderator

    Re: CRUSDADER CT61C condenser dryer

    iadom wrote:

    Be sure to pull the plug and test the old thermostats with a suitable meter first.

    Have you actually tested the stats, you cannot tell just by looking at them, folly to change them without doing so. :lesson:

    Jim.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.